7 Inch Low Profile Headlight
$499.00 – $739.00
A slim, compact, low profile headlight that is perfect for getting your headlight as close to the forks as possible. This is the same headlight setup we use in our Moto Guzzi LED Headlight Upgrades and our Ducati Scrambler 7 Inch Headlight Conversion. Available in all semi-matte black or with a chrome trim ring.
- Headlight Housing (pre-assembled with stainless hardware)
- Choice of Headlight (Adaptive LED or Standard LED)
Both of our LED headlamp options are made in the US by JW Speaker, one of the leading lighting manufacturers in the world and backed by a 5-year warranty. DOT and ECE Approved for all directions of traffic (symmetrical pattern).
The Adaptive 2, our most advanced LED Headlight. Designed by JW Speaker to specifically increase your nighttime safety and comfort. Onboard intelligence senses the lean angle while cornering to dynamically fill the dark inside corner (see photo). Similar to our Evo S, this Adaptive headlight produces clean, clear, LED lighting like what is found in some of the most advanced automotive headlights on the market today. Available in a Black or Chrome Inner Bezel
Evo S LED
The new STANDARD. Our Evo S LED features the super wide and smooth beam pattern low beam optics from the highly praised Adaptive LED, with a little extra output done by using the latest in LED tech. Ride into the darkest backroads with a high beam package that puts out an amazing amount of throw in combination with the low beam due to them both staying on. This combination creates the best of both worlds to keep you riding with plenty of light at high speed, never out ride your light again. We finished the design off with a large, very bright, diffused front position optic to greatly increase your visibility to others on the road at all times. Available in a Black or Graphite Inner Bezel.
- Bucket Finish: Semi-Matte Black Powder Coat
- Retainer Ring Finish: Semi-Matte Black Powder Coat or Chrome
- Housing Material: Steel
- Mounting Points: m8 x 1.25mm Thread
- Housing OD: 7.43in (189mm)
- Outer Depth: 3.19in (81mm)
- Inner Depth: 2.79in (71mm)
- Lens Opening: 6.65in (196mm)
- Mounting Point Distance: 7.30in (186mm)
- Mounting Point to Back: 1.28in (32.5mm)
Housing Finish – Choose from Black or Black with Chrome Ring.
H4 Adapter Harness – Go from an H4 directly into your factory harness.
Headlight Bolt Kit – Perfect add-on to complete your install. Includes (2) Stainless Steel M8 x 30mm x 1.25 Pitch Button-Head Bolts, (2) Laser Cut Rubber Bushings, and (2) Black Nylon Washers.
|Dimensions||10 × 9.5 × 7 in|
Only logged in customers who have purchased this product may leave a review.