LED Headlight for Triumph Bobber
$375.20 – $407.20
The ultimate lighting upgrade for your Triumph Bonneville Bobber. Simple to install and completely plug and play.
DOT and/or ECE Compliant • MADE IN USA
(see more below)
Description
Upgrade the lighting performance of your Triumph Bonneville Bobber with the Motodemic LED Headlight Upgrade. This upgrade directly replaces the poor-performing reflector unit in your stock bucket with a premium Solid-Optic LED unit. The LED unit packs some of the best optics and lighting technology available and is a massive improvement over the stock headlight being wider and brighter without blinding other drivers on the road.
Completely plug-and-play and requires no modifications or wiring.
What’s Included:
- Bobber Specific Headlight Unit
- Adapter Harness for 2018+ Bobber Black and Speed Master
Evo S LED
The US-made Evo S LED was built from the ground up to be the best motorcycle-specific lamp on the market. It features low-beam optics that produce a super-wide smooth beam pattern to give you peripheral-covering clean light. Ride into the darkest backroads with a high-beam package that puts out an amazing amount of throw in combination with the low beam due to them both staying on. This combination creates the best of both worlds to keep you riding with plenty of light at high speed. Never outride your light again. To increase your visibility to others on the road day and night, we finished the design off with a large, very bright, diffused front position optic. Available with a Black or Graphite Inner Bezel. Made in the US and backed by a 5-year warranty. DOT and ECE approved for all directions of traffic (symmetrical pattern).
Headlight Specs:
- DOT and ECE Approved
- Color Temperature: 5000K (daylight)
- Lens Type: Polycarbonate
- Power Draw (each unit): 24.7 watts on low 41.6 watts on high
- 5-year Warranty
Installation
- Remove headlight retaining ring using a Philips screwdriver
- Remove the stock headlight unit, unplug headlight, and remove parking light (for 21+ Bobber / 18+ Bobber Black/Speedmaster, the headlight connection is under the fuel tank)
- Remove parking light bulb, plug in parking light (red wire aligns with yellow wire), plug in headlight
- Install new LED unit and headlight retaining ring
Additional information
Weight | 3 lbs |
---|---|
Dimensions | 11 × 11 × 5 in |
Headlight | Evo S LED – Black, Evo S LED – Graphite |
Model | 17-20 Standard Bobber, 21+ Bobber / 18+ Bobber Black/Speedmaster |
You must be logged in to post a review.
Reviews
There are no reviews yet.