Rizoma Iride S (Pair)

Pair of Iride S – amber turn signal with red running and brake light (4-wire rear application)

Options
Wiring Adapter – Allows for plug and play installation*
Flasher Relay – See model listing below

All OUTLET sales are final. No returns or Exchanges.
(see more below)
Category:

Description

The Rizoma Iride (ˈi.ri.de) is one of the latest signals from their design house in Italy. Classic styling with a 35mm diameter iris style lens with an additional optic down the side to increase the field of view. Produces a lot of light using the latest SMD LED technology.

Iride S – amber turn signal with red running and brake light (4-wire rear application)

Whats Included

  • (2) Black Turn Signals w/M8 Thread and Nut
  • 15″/38cm Wire Length
  • Instructions
  • (4) Load Resistors

Options
Wiring Adapter – Allows for plug and play installation*
Flasher Relay – See model listing below

Specs
Material: Aluminum
Color: Black
Diameter: 35mm
Length of thread: 12.8mm
Wire Length: approx 38cm
Installation: M8 Threaded Bolt
Power Consumption: about 1.4 Watt

Known Relay & Resistor Compatibility:
Typically only one resistor per side is necessary and can be installed in-line either on the front or rear turn signals. When applicable, swapping your analog relay for the digital ones we offer is a much cleaner installation as you do not have to deal with placing the resistors that can get very hot. Only one relay is needed for the entire bike. If you already have an integrated LED tail light, chances are you already have resistors or the correct flasher relay. Rizoma Signals include resistors!

Triumph
2013+ Street Triple – None Needed
2007-2012 Triumph Street Triple – 2 Prong Relay
2005-2010 Speed Triple – 3 Prong Relay
2016+ (Water Cooled) Bonneville, Thruxton, Street Twin, Street Scrambler, Street Cup – None Needed (signal flash rate controlled from the display)
2012-2015 (VIN = 521669+) Bonneville, Thruxton, Scrambler – 2 Prong Relay
Pre-2012 Bonneville, Thruxton, Scrambler – 3 Prong Relay

Ducati
696/796/1100 – Resistors needed on front OR rear
821/1200 & Scrambler – If upgrading front AND rear to LED then no resistors are needed

Yamaha
XSR and FZ/MT – 2 Prong Relay

BMW
RnineT – North American models, resistor needed or take the bike to a dealer for LED coding. All others, none needed

 

*Wiring adapters only cover the turn signal function, S models require additional wiring. Install adapters allow for installation in stock signal location.

Additional information

Weight 1 lbs
Dimensions 9 × 5 × 2.5 in